MC100EP451FA Overview
The flip flop is packaged in a case of 32-LQFP. There is an embedded version in the package Tray. Differentialis the output configured for it. It is configured with a trigger that uses Positive Edge. Surface Mountmounts this electrical part. Powered by a 3V~5.5Vvolt supply, it operates as follows. Currently, the operating temperature is -40°C~85°C TA. This logic flip flop is classified as type D-Type. JK flip flop belongs to the 100EPseries of FPGAs. Its output frequency should not exceed 3GHz Hz. In total, there are 1 elements. During its operation, it consumes 135mA quiescent energy. There are 32 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. A voltage of 3.3V is used as the power supply for this D latch. It reaches 5.5Vwhen the supply voltage is maximal (Vsup). Normally, the supply voltage (Vsup) should be above 3V. Additionally, you may refer to the additional NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V of the electronic flip flop.
MC100EP451FA Features
Tray package
100EP series
MC100EP451FA Applications
There are a lot of Rochester Electronics, LLC MC100EP451FA Flip Flops applications.
- Event Detectors
- Single Down Count-Control Line
- Divide a clock signal by 2 or 4
- QML qualified product
- Test & Measurement
- Asynchronous counter
- ESD performance
- Computers
- Synchronous counter
- Set-reset capability
