Name: MAX4667CPE
Brand: Rochester Electronics, LLC
SKU: MAX4667CPE
Availability: InStock

new-10%

MAX4667CPE

Manufacturer part number:MAX4667CPE

Manufacturer:Rochester Electronics, LLC

Description:275ns, 175ns SPST - NC 2.5Ohm DUAL Analog Switches 16 Pins 500pA 15V 16-DIP (0.300, 7.62mm)

Case Package:SOT-23

Datasheet:MAX4667CPE Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Mounting Type	Through Hole
Package / Case	16-DIP (0.300, 7.62mm)
Surface Mount	NO
Operating Temperature	0°C~70°C TA
Packaging	Tube
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Terminal Finish	TIN LEAD
Technology	CMOS
Terminal Position	DUAL
Peak Reflow Temperature (Cel)	240
Number of Functions	2
Supply Voltage	15V
Time@Peak Reflow Temperature-Max (s)	20
Pin Count	16
JESD-30 Code	R-PDIP-T16
Qualification Status	COMMERCIAL
Number of Channels	1
Number of Circuits	2
Voltage - Supply, Single/Dual (±)	4.5V~36V ±4.5V~20V
Neg Supply Voltage-Nom (Vsup)	-15V
On-State Resistance (Max)	2.5Ohm
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	60 dB
Current - Leakage (IS(off)) (Max)	500pA
Channel Capacitance (CS(off), CD(off))	65pF 65pF
On-state Resistance Match-Nom	0.05Ohm
Switch Circuit	SPST - NC
Switch Time (Ton, Toff) (Max)	275ns, 175ns
Charge Injection	450pC
Channel-to-Channel Matching (ΔRon)	50m Ω
Crosstalk	-66dB @ 1MHz
Switch-on Time-Max	400ns
Switch-off Time-Max	300ns
Length	19.175mm
RoHS Status	Non-RoHS Compliant

MAX4667CPE Product Details

MAX4667CPE Overview

Due to its 16-DIP (0.300, 7.62mm) packaging, the electronic part is convenient for international shipping. The advanced packaging method Tube provides high reliability. In Through Hole, this analog switch is mounted. Multiplexers and demultiplexers have a number of circuits 1:1. Increasing operating temperature to around 0°C~70°C TA. In total, there are 16 terminations. Due to its 1 channels, the electrical component produces high-quality output. An 15V voltage supply should allow the electrical part to be turned on and run. A total of 16 pins are injected into the body of the electronic part. These analog multiplexers are built based on SPST - NC switching circuits. The multiplexer consists of 2 circuits.