DG441LDQ-E3 Overview
The electronic part can be shipped overseas conveniently because it is packaged in 16-TSSOP (0.173, 4.40mm Width). In order to provide high reliability, an advanced packaging method Tube is used. There is an analog multiplexer mounted in position Surface Mount. There is 1:1 ratio between the number of multiplexers and demultiplexers. Around -40°C~85°C TA is the extended operating temperature. This electronic part offers high-quality output due to its 4 channels. The analog switch ics are built using SPST - NC switching circuits. A total of 4 circuits make up this switch device. Search with DG441 if you are looking for analog multiplexer variants. It has an internal resistance of 35Ohm. The functions of 16 pins can be found in the datasheets. In normalcircumstances, users should not exceed 12V volts for the multiplexer. Dual, Single supply type digital switch with a low cost. 2.7V is the lowest voltage that should be fed to the electronic electronic part. In order to operate this switch device, it would need a current of 10μA. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 6V. In the case of dual power supplies, you should connect at least 3V. There are 4 inputs to be operated. During operation, the multiplexer should not be exposed to a temperature above 85°C. The analog switch ics has 4 outputs. Suppliers offer the 16-TSSOP package.
DG441LDQ-E3 Features
4 Channels
Switch Circuit: SPST - NC
10μA Supply Current
-3db Bandwidth: 280MHz
DG441LDQ-E3 Applications
There are a lot of Vishay Siliconix
DG441LDQ-E3 Analog Switches & Multiplexers ICs applications.
- Isolation
- Medical
- Imaging
- Ultrasound
- Audio and video switching
- Automatic test equipment
- Precision data acquisition
- Battery-powered systems
- Sample-and-hold systems
- Communication systems
