SI5344D-D09178-GMR Overview
The Tape & Reel (TR) method is used for packaging clock ICs. This clock generator ic can sustain a maximum temperature of 260 during reflowing. 44 terminations can be found in frequency generators. Clock generator ics require a voltage of 1.8V. Approximately 1.89V is the maximum supply voltage needed by this time clock generator. The digital clock generator incorporates CLOCK GENERATOR, PROCESSOR SPECIFIC uPs, uCs, and peripheral ICs. Safety considerations dictate that the supply voltage for this frequency synthesizer should be greater than 1.71V. Whenever the frequency generators's operating temperature exceeds 85°C, ha85°Cards may occur. With this clock-generating device, 350MHz of high-quality clock output frequency can be generated. An ambient temperature below -40°C may cause this frequency generator to malfunction.
SI5344D-D09178-GMR Features
Supply voltage of 1.8V
Output clock frequency (Max) of 350MHz
SI5344D-D09178-GMR Applications
There are a lot of Silicon Labs SI5344D-D09178-GMR Clock Generators applications.
- Antenna automatic tracking
- Clock recovery
- Simple clock clean-up circuits
- Mobile telephones
- Vector network analyzers (VNA)
- Bluetooth receivers
- Frequency synthesis
- Local oscillators (LOs)
- FM demodulation networks for FM operations
- Signal demodulation
