CD74HC534E Overview
It is embeded in 20-DIP (0.300, 7.62mm) case. D flip flop is included in the Tubepackage. The output it is configured with uses Tri-State, Inverted. The trigger it is configured with uses Positive Edge. Through Holeis in the way of this electric part. The supply voltage is set to 2V~6V. Temperature is set to -55°C~125°C TA. A flip flop of this type is classified as a D-Type. It belongs to the 74HCseries of FPGAs. In order for it to function properly, its output frequency should not exceed 60MHz. In total, it contains 1 elements. There is a consumption of 8μAof quiescent energy. Currently, there are 20 terminations. The D flip flop is powered by a voltage of 5V . This T flip flop has a capacitance of 10pF farads at the input. Devices in the HC/UHfamily are electronic devices. As soon as Vsup reaches 6V, the maximum supply voltage is reached. Normally, the supply voltage (Vsup) should be kept above 2V. The D flip flop has no ports embedded.
CD74HC534E Features
Tube package
74HC series
CD74HC534E Applications
There are a lot of Rochester Electronics, LLC CD74HC534E Flip Flops applications.
- Safety Clamp
- Frequency Dividers
- Storage registers
- Bus hold
- Divide a clock signal by 2 or 4
- Clock pulse
- High Performance Logic for test systems
- Bounce elimination switch
- Individual Asynchronous Resets
- Dynamic threshold performance
