MAX708TCSA+ Overview
It is mounted through 8 terminals on the power management. This power ic is packaged in a way that looks like a Tube. In this PMIC, you can find 1 functions for your reference. Depending on the power managment ic you are looking at, you can find a total of 1 channels. Please find attached 8-SOIC (0.154, 3.90mm Width) functions for your reference in this IC power. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. Specifies a reflow peak temperature of 260 for the package during reflow. Manage ics operate at 3V supply voltages. Power management conducts at a voltage of 1. Surface Mount, Through Hole mounts power management on the wall. This power ic can be sub-categorized as Power Management Circuits. It has a total of 8 pins that are attached to IC management. This power management has 8 pins. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). Power management recommends the Surface Mount mounting type. This power management is the recommended temperature range for the supervisors: 0°C~70°C TA. During normal operation, this power managment ic can generate Push-Pull, Push-Pull of output voltage. Supplied with a operating current of 135μA, this PMIC is capable of fully function as specified. There are also other features in the software such as [0], just to mention a few. It is always advisable to use MAX708, the base supervisor number, when searching for similar PMICs from the manufacturer. A power supply of 3.3/5V watts is required for the operation of this power management.
MAX708TCSA+ Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
135μA operating supply current
MAX708TCSA+ Applications
There are a lot of Maxim Integrated MAX708TCSA+ Voltage Supervisors applications.
- Analog circuit
- Medical-specific isolation transformer
- Medical-specific insulation monitor
- Functional modules
- Leakage current detection
- Refrigeration
- Sensitive sensors
- Stable power system
- Power distribution systems of operating room
- Detection of phase imbalance
