LTC2919HMS-2.5#PBF Overview
Power management is mounted through 10 terminals. Tube-packaging is used. Power management is possible to find a series of 1 functions. It is possible to find on this power management a series of 1 channels. In this PMIC, you can find 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) functions for your reference. There are a number of benefits that this PMIC has in common with other Multi-Voltage Supervisor manage ics. IC management is specified that the package peak reflow temperature should be 260. There is a voltage supply of 2.5V for the PMIC chip, and the chip conducts at that voltage. Power management conducts at a voltage of 3. The power management belongs to the Power Management Circuits subcategory. Power management has a total of 10 pins. There are 10 pins on the supervisor. It is recommended that Vsup should not be less than 500mV for this IC power. Surface Mount mounting is recommended. The temperature of the supervisors should be set to this range: -40°C~125°C TA. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. If you want to search for similar IC managements of this manufacturer, you can always refer to LTC2919, which is the base power ics number. The power management must be powered by 2.5V volts to function properly.
LTC2919HMS-2.5#PBF Features
Multi-Voltage Supervisor type
Minimum supply voltage of 500mV
LTC2919HMS-2.5#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC2919HMS-2.5#PBF Voltage Supervisors applications.
- Display equipment
- Rechargeable batteries
- Power communication system
- Data storage applications
- Military electronics
- DSP
- Dash board
- Digitally controlled LDO regulators circuit
- Leakage current detection
- Smart meter
