Name: MAX4522CUE+
Brand: Maxim Integrated
SKU: MAX4522CUE+
Price: 2.84000 USD
Availability: InStock

new-10%

MAX4522CUE+

Manufacturer part number:MAX4522CUE+

Manufacturer:Maxim Integrated

Description:80ns, 30ns SPST - NO 100Ohm Analog Switches BREAK-BEFORE-MAKE MAX4522 16 Pins 1nA 5V 16-TSSOP (0.173, 4.40mm Width)

Case Package:SOT-23

Datasheet:MAX4522CUE+ Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	6 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Number of Pins	16
Operating Temperature	0°C~70°C TA
Packaging	Tube
Published	2007
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	100Ohm
Terminal Finish	Matte Tin (Sn)
Additional Feature	ALSO OPERATE WITH 2V TO 12V SINGLE SUPPLY
Subcategory	Multiplexer or Switches
Max Power Dissipation	696mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	5V
Terminal Pitch	0.65mm
Base Part Number	MAX4522
Output	SEPARATE OUTPUT
Pin Count	16
Operating Supply Voltage	5V
Number of Channels	1
Number of Circuits	4
Max Supply Voltage	12V
Min Supply Voltage	2V
Operating Supply Current	1μA
Nominal Supply Current	1μA
Max Supply Current	1μA
Throw Configuration	SPST
Turn On Delay Time	100 ns
Voltage - Supply, Single/Dual (±)	2V~12V ±2V~6V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	40 ns
Max Dual Supply Voltage	6V
On-State Resistance (Max)	100Ohm
Min Dual Supply Voltage	2V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	90 dB
Current - Leakage (IS(off)) (Max)	1nA
Channel Capacitance (CS(off), CD(off))	2pF 2pF
On-state Resistance Match-Nom	1Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	80ns, 30ns
Charge Injection	1pC
Channel-to-Channel Matching (ΔRon)	1 Ω
Crosstalk	-90dB @ 100kHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	80ns
Switch-off Time-Max	30ns
Normal Position	NO
Height Seated (Max)	1.1mm
Length	5mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant

MAX4522CUE+ Product Details

MAX4522CUE+ Overview

The electronic component is convenient to ship overseas because it is packed in a 16-TSSOP (0.173, 4.40mm Width). This high-reliability packaging method uses advanced packaging methods Tube. Multiplexers like this are mounted in the Surface Mount position. Multiplexers and demultiplexers have a ratio of 1:1. Operation at a temperature around 0°C~70°C TA. 16 terminations have been made so far. A high-quality output is provided by the electrical component's 1 channels. If the voltage supply is 5V volts, the electrical component should be turned on and run. It is part of the design of the 16 series that this electronic component is included. Circuits based on SPST - NO switching are used to construct these analog switch ics. It consists of 4 circuits. Try searching for the analog switch ic with MAX4522 if you are looking for variants. As far as internal resistance is concerned, it has 100Ohm. You can find the functions of the 16 pins in the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. Multiplexers should not be powered above 12V in normal situations. An effective Dual, Single supply digital multiplexer. It is recommended that the electrical component receives a voltage of 2V. It would be sufficient to run this analogue multiplexer with 1μA current. A digital multiplexer may suffer damage if voltage is applied above 1μA. For this switch, a dual supply voltage is feasible, but it must not exceed 6VIf you are using dual power supplies, you should attach at least 2V. There are SEPARATE OUTPUT outputs on this analog switch ic. There is a voltage range of 5V operating voltages for the electrical part. Check out the electrical component's additional features, such as the following: ALSO OPERATE WITH 2V TO 12V SINGLE SUPPLY.