Name: DG309CJ-E3
Brand: Vishay Siliconix
SKU: DG309CJ-E3
Price: 2.97000 USD
Availability: InStock

new-10%

DG309CJ-E3

Manufacturer part number:DG309CJ-E3

Manufacturer:Vishay Siliconix

Description:200ns, 150ns SPST - NC 85Ohm Analog Switches BREAK-BEFORE-MAKE DG309 16 Pins 500pA 15V 16-DIP (0.300, 7.62mm)

Case Package:SOT-23

Datasheet:DG309CJ-E3 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	12 Weeks
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	16-DIP (0.300, 7.62mm)
Number of Pins	16
Weight	1.627801g
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	2000
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	100Ohm
Terminal Finish	MATTE TIN
Subcategory	Multiplexer or Switches
Max Power Dissipation	470mW
Technology	CMOS
Peak Reflow Temperature (Cel)	NOT SPECIFIED
Number of Functions	4
Supply Voltage	15V
Reach Compliance Code	unknown
[email protected] Reflow Temperature-Max (s)	NOT SPECIFIED
Base Part Number	DG309
Output	SEPARATE OUTPUT
Pin Count	16
Qualification Status	Not Qualified
Operating Supply Voltage	15V
Number of Channels	1
Max Supply Voltage	36V
Min Supply Voltage	13V
Operating Supply Current	10μA
Power Dissipation	470mW
Max Supply Current	10μA
Throw Configuration	SPST
Turn On Delay Time	200 ns
Number of Inputs	4
Voltage - Supply, Single/Dual (±)	4V~44V ±4V~22V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	150 ns
Max Dual Supply Voltage	22V
On-State Resistance (Max)	85Ohm
Min Dual Supply Voltage	7V
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	78 dB
Current - Leakage (IS(off)) (Max)	500pA
Channel Capacitance (CS(off), CD(off))	5pF 5pF
Switch Circuit	SPST - NC
Switch Time (Ton, Toff) (Max)	200ns, 150ns
Charge Injection	1pC
Channel-to-Channel Matching (ΔRon)	1.7 Ω
Crosstalk	-95dB @ 100kHz
Switching	BREAK-BEFORE-MAKE
Normal Position	NC
Height	3.81mm
Length	21.33mm
Width	7.11mm
RoHS Status	ROHS3 Compliant

DG309CJ-E3 Product Details

DG309CJ-E3 Overview

This electronic part is conveniently packaged in 16-DIP (0.300, 7.62mm), making it easy to ship abroad. This packaging method provides high reliability because it uses advanced packaging techniques. In Through Hole, you'll find this switch device. Multiplexers and demultiplexers have the same number of circuits 1:1. Extended operating temperature around -40°C~85°C TA. A total of 16 terminations have been recorded. The electronic part delivers high-quality output through its 1 channels. Turning on and running the electrical part should be easy with a 15V voltage supply. Electronic part bodies are injected with 16 pins. Unlike digital switches, these are based on SPST - NC switching circuits. Try searching for DG309 variants of the analog switch ic. An switch multiplexer with 100Ohm internal resistance has a value of 100Ohm. For functions related to 16 pins, please refer to the datasheets. Theswitch device is a typical Multiplexer or Switches. Users shouldn't supply more than 36V voltage to the switch device. A cost-effective Dual, Single supply type analogue multiplexer. There should be 13V voltage fed to the electrical part below 13V. This digital switch can be operated with a current of 10μA. It may damage the digital multiplexer if the voltage is higher than 10μA. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 22V. You should attach at least 7V voltage if you are using dual power supply. The outputs of this digital multiplexer are SEPARATE OUTPUT in number. Operating voltages of 15V are compatible with the electrical part. The 4 inputs need to be operated in order to work.