Name: TL594CDR2
Brand: ON Semiconductor
SKU: TL594CDR2
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	16
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Published	2005
Series	SWITCHMODE™
JESD-609 Code	e0
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Terminal Finish	Tin/Lead (Sn/Pb)
Subcategory	Switching Regulator or Controllers
Technology	BIPOLAR
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	240
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	TL594
Function	Step-Down, Step-Up/Step-Down
Number of Outputs	2
Output Type	Transistor Driver
Operating Supply Voltage	15V
Input Voltage-Nom	15V
Analog IC - Other Type	SWITCHING CONTROLLER
Output Configuration	Positive
Output Current	500mA
Voltage - Supply (Vcc/Vdd)	7V~40V
Control Features	Dead Time Control, Frequency Control
Input Voltage (Min)	7V
Topology	Buck, Push-Pull
Control Mode	VOLTAGE-MODE
Input Voltage (Max)	40V
Control Technique	PULSE WIDTH MODULATION
Rise Time	100ns
Synchronous Rectifier	Yes
Fall Time (Typ)	40 ns
Max Frequency	300kHz
Max Duty Cycle	48 %
Duty Cycle (Max)	96%
Clock Sync	No
Output Phases	1
Length	9.9mm
Width	3.9mm
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead

TL594CDR2 Product Details

TL594CDR2 Overview

It comes in the 16-SOIC (0.154, 3.90mm Width) package, which makes switching controller suitable for most applications. 2 outputs are supported by the dc motor controller. A solid enclosure of Tape & Reel (TR) surrounds pmic. With Transistor Driver dc switching's output (s), it is able to handle it. The supply and operating voltage of the dc control are 7V~40V. Work well in dc switchers with a -40°C~85°C TA. Surface Mount makes it suitable for general dc dc regulator. DCDC regulator is controlled efficiently by Dead Time Control, Frequency Control. The switch converters are connected to a SWITCHING CONTROLLER analog IC. Thare switching converters has a terminal (s) at DUAL . Various 16 terminations. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. DC switcher's input voltageis set to 15V. In addition to "TL594", there are other relevant dc to dc converter ics you can find. There are a total of 16 pins on switching converter. In particular, switching converter belongs to the Switching Regulator or Controllers family. It is recommended to use 7V as the minimum input voltage of dc dc voltage regulator. The dc to dc regulator is limited to 40V input voltage. A starting point for a project is to note down the dc dc regulator's usual output current, which is 500mA. voltage regulator dc to dcs with a 48 % duty cycle are designed to be reliable when powered on and powered off. It is estimated that this dc regulatorhas a maximum frequency of 300kHz. Users should apply 15V to operate the voltage regulator dc to dc safely and reliably. The dc to dc voltage regulator is from the SWITCHMODE? series.