Name: ADG528AKN
Brand: Hotenda
SKU: ADG528AKN
Price: 6.86000 USD
Availability: InStock

new

ADG528AKN

Manufacturer part number:ADG528AKN

Manufacturer:Hotenda

Description:300ns, 300ns 450Ohm Analog Switches BREAK-BEFORE-MAKE ADG528 18 Pins 1nA 15V 18-DIP (0.300, 7.62mm)

Case Package:SOT-23

Datasheet:ADG528AKN Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Mounting Type	Through Hole
Package / Case	18-DIP (0.300, 7.62mm)
Surface Mount	NO
Number of Pins	18
Operating Temperature	-40°C~85°C TA
Packaging	Tube
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	18
ECCN Code	EAR99
Resistance	450Ohm
Subcategory	Multiplexer or Switches
Max Power Dissipation	470mW
Technology	CMOS
Peak Reflow Temperature (Cel)	NOT APPLICABLE
Number of Functions	1
Supply Voltage	15V
Terminal Pitch	2.54mm
Reach Compliance Code	not_compliant
Time@Peak Reflow Temperature-Max (s)	NOT APPLICABLE
Base Part Number	ADG528
Pin Count	18
Qualification Status	Not Qualified
Operating Supply Voltage	15V
Number of Channels	8
Interface	Parallel
Number of Circuits	1
Max Supply Voltage	16.5V
Min Supply Voltage	10.8V
Analog IC - Other Type	SINGLE-ENDED MULTIPLEXER
Power Dissipation	28mW
Throw Configuration	DPST
Propagation Delay	300 ns
Turn On Delay Time	450 ns
Voltage - Supply, Single/Dual (±)	10.8V~16.5V ±10.8V~16.5V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	450 ns
Max Dual Supply Voltage	16.5V
On-State Resistance (Max)	450Ohm
Min Dual Supply Voltage	10.8V
Multiplexer/Demultiplexer Circuit	8:1
Off-state Isolation-Nom	68 dB
Current - Leakage (IS(off)) (Max)	1nA
Channel Capacitance (CS(off), CD(off))	5pF 22pF
On-state Resistance Match-Nom	5Ohm
Switch Time (Ton, Toff) (Max)	300ns, 300ns
Charge Injection	4pC
Channel-to-Channel Matching (ΔRon)	22.5 Ω
Switching	BREAK-BEFORE-MAKE
Signal Current-Max	0.02A
Height Seated (Max)	4.57mm
Width	7.62mm
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead

ADG528AKN Product Details

ADG528AKN Overview

Shipping overseas is convenient due to the electrical component's packing in 18-DIP (0.300, 7.62mm). In order to provide high reliability, an advanced packaging method Tube is used. Mounted in Through Hole is this multiplexer. In the multiplexer and demultiplexer, 8:1 represents the number of circuits. Operating temperature extended to -40°C~85°C TA. Totally, there are 18 terminations. The electronic part delivers high-quality output through its 8 channels. An 15V voltage supply should allow the electrical part to be turned on and run. This electrical component is included in the 18 series of products. The multiplexer consists of 1 circuits. Look for analog switch ic variants by searching with ADG528. This digital multiplexer has 450Ohm internal resistance. Datasheets for functions of 18 pins are available. The analog multiplexer shown here is a typical Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 16.5V. The digital multiplexer has a low cost Dual, Single supply. 10.8V is the lowest voltage that should be fed to the electronic electronic part. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 16.5V. With dual power supplies, you should attach at least 10.8V. Integrated with SINGLE-ENDED MULTIPLEXER analog IC. There is a voltage range of 15V operating voltages for the electrical part.