NL7WB66USG Overview
As the electronic part is packed in 8-VFSOP (0.091, 2.30mm Width), international shipping is convenient. High reliability is achieved by using advanced packaging method Tape & Reel (TR). There is an analog multiplexer mounted in position Surface Mount. Multiplexers and demultiplexers have a ratio of 1:1. Operational temperature extended around -55°C~125°C TA. A electrical component with 2 channels is capable of high-quality output. A SPST - NO switching circuit is used for these analog switches. A total of 2 circuits make up this switch device. Try searching with NL7WB66 to find analog multiplexer variants. Analog switches have 30Ohm internal resistance. Please refer to the datasheets for 8 pins functions. It is normally recommended that users do not supply the multiplexer with voltages higher than 5.5V. Analogue multiplexers of the Single supply type that are cost-effective. 1.65V should be the lowest voltage fed to the electronic component. The analogue multiplexer could operate on 1μA current. An analogue multiplexer drains from a single voltage supply at 1.65V~5.5V. The analogue multiplexer may be damaged if voltage is greater than 1μA. There is a voltage range of 5V operating voltages for the electrical part. Operating the 2 inputs requires 2 inputs. In an environment with a temperature higher than 125°C, the digital switches should not operate. The analog switch ics includes 2 outputs. Suppliers offer a package with US8. Its conductivity is 2-bit.
NL7WB66USG Features
2 Channels
Switch Circuit: SPST - NO
1μA Supply Current
-3db Bandwidth: 186MHz
2-Bit
NL7WB66USG Applications
There are a lot of ON Semiconductor NL7WB66USG Analog Switches & Multiplexers ICs applications.
- Channelized and Unchannelized DS3 applications
- Optical Applications
- Relay replacements
- ISDN NT1/TA
- ATM
- Switching Systems
- Audio and video signal routing
- HDTV
- Channel Banks
- Communications systems
