Name: DG303BDY-E3
Brand: Vishay Siliconix
SKU: DG303BDY-E3
Price: 6.20000 USD
Availability: InStock

new-10%

DG303BDY-E3

Manufacturer part number:DG303BDY-E3

Manufacturer:Vishay Siliconix

Description:300ns, 250ns DPST - NO/NC 50Ohm Analog Switches BREAK-BEFORE-MAKE DG303 14 Pins 1nA 15V 14-SOIC (0.154, 3.90mm Width)

Case Package:SOT-23

Datasheet:DG303BDY-E3 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	12 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	14-SOIC (0.154, 3.90mm Width)
Number of Pins	14
Weight	338.011364mg
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	2009
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	14
Resistance	50Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	600mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	15V
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	DG303
Output	SEPARATE OUTPUT
Pin Count	14
Qualification Status	Not Qualified
Operating Supply Voltage	15V
Number of Channels	1
Number of Circuits	2
Max Supply Voltage	36V
Min Supply Voltage	13V
Operating Supply Current	230μA
Nominal Supply Current	230nA
Power Dissipation	600mW
Max Supply Current	1mA
Throw Configuration	DPST, SPDT
Turn On Delay Time	150 ns
Number of Inputs	4
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	130 ns
Max Dual Supply Voltage	22V
On-State Resistance (Max)	50Ohm
Min Dual Supply Voltage	7V
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	62 dB
Current - Leakage (IS(off)) (Max)	1nA
Channel Capacitance (CS(off), CD(off))	14pF 14pF
Switch Circuit	DPST - NO/NC
Switch Time (Ton, Toff) (Max)	300ns, 250ns
Charge Injection	8pC
Crosstalk	-74dB @ 500kHz
Switching	BREAK-BEFORE-MAKE
Drain to Source Resistance	30Ohm
Voltage - Supply, Dual (V±)	±15V
Height	1.55mm
Length	8.75mm
Width	4mm
REACH SVHC	Unknown
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

DG303BDY-E3 Product Details

DG303BDY-E3 Overview

As the electronic part is packed in 14-SOIC (0.154, 3.90mm Width), international shipping is convenient. A high level of reliability can be achieved through the use of an advanced packaging method Tube. The multiplexer is located in Surface Mount. 2:1 is the number of circuits in the multiplexer and demultiplexer. Operating temperature extended to -40°C~85°C TA. Total terminations are 14. The electronic part provides high-quality output because it has 1 channels. Powered by a 15V voltage supply, the electrical part should be switched on and run. The electrical component body receives 14 pins. Circuits based on DPST - NO/NC switching are used to construct these analog switch ics. There are 2 circuits in this switch device. Try searching with DG303 to find analog multiplexer variants. An switch multiplexer with 50Ohm internal resistance has a value of 50Ohm. Datasheets for 14 pin functions are available upon request. The analogue multiplexer in this example is a typical Multiplexer or Switches. Multiplexers should not be powered above 36V in normal situations. The analog switch ic is of the Dual, Single supply type and is cost-effective. The lowest voltage the electronic part should receive is 13V. An operating current of 230μA would be sufficient for this switch device. When the digital multiplexer is charged above 1mA, damage can occur. Despite this switch device's dual supply capability, its voltage should not exceed 22V. It is recommended that you attach at least 7V to your dual power supply. SEPARATE OUTPUT outputs are utilized by this digital multiplexer. 15V operating voltages can be used with this electrical part. Operating the 4 inputs requires 4 inputs. It has a Drain to Source resistance of 30Ohm ohms.