NCP304LSQ27T1 Overview
As you can see, this power management is mounted through 4 terminals. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. Please find attached 1 functions for your reference in this IC power. A series of 1 channels can be found on this supervisor. In this IC management you will find SC-82A, SOT-343 functions for you to refer to. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. During operation, the power ic is supplied with a voltage of 1.5V. When a supply voltage of 1 is applied to the power ic, it conducts. Using Surface Mount, IC management is mounted. Power Management Circuits is a subcategory of this PMIC chip. Taking into account all of the pins, this power management has a total of 4. Power managment ic pin count is 4. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 800mV. Voltage (Vsup) shouldn't exceed 10V volts in this PMIC. Surface Mount is the recommended mounting type. The temperature of the supervisors should be set to this range: -40°C~85°C TA. The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. Supplied with a operating current of 1μA, this PMIC is capable of fully function as specified. To find similar IC managements from the manufacturer, you can always search by NCP304. The maximum supply temperature voltage supervisor can handle is 3.3μA.
NCP304LSQ27T1 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 800mV
1μA operating supply current
NCP304LSQ27T1 Applications
There are a lot of ON Semiconductor NCP304LSQ27T1 Voltage Supervisors applications.
- Automotive permanent magnet synchronous motors
- Low voltage/high power - AI, GPU
- Important electronics for automotive safety
- Military electronics
- Leakage protection
- Microcontroller system
- Utility meter
- Network equipment
- Radar
- Military communications
