MAX6394US294D4+T Overview
As you can see, this power management is mounted through 4 terminals. A Tape & Reel (TR) package is used to package the power management. In this IC power you will find 1 functions for you to refer to. This power managment ic consists of 1 channels, each of which can be used independently. As a reference, this IC power includes TO-253-4, TO-253AA functions for your convenience. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. During operation, the power ic is supplied with a voltage of 3.6V. A supply voltage of 1 is used to conduct the PMIC chip. The power management is mounted by Surface Mount. The power management system can be categorized as a Power Management Circuits chip. 4 pins are present in total in this power management. The pins of the power management system count 4. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1V, which is the minimum supply voltage that should be applied. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. Surface Mount is the recommended mounting type. We recommend setting the supervisors to -40°C~125°C TA degrees. There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. Among other features, IC power can be also taken advantage of [0], for instance. To find similar IC managements from the manufacturer, you can always search by MAX6394. There is a requirement for 3/5V power to power this power management. A maximum supply temperature of 15μA can be used with this power management.
MAX6394US294D4+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
MAX6394US294D4+T Applications
There are a lot of Maxim Integrated MAX6394US294D4+T Voltage Supervisors applications.
- Important electronics for automotive safety
- Solar power charger
- Computer applications
- Efficient information transmission
- Insulation fault location system
- Electronics installed in the vehicle
- Sensitive sensors
- Detection of phase imbalance
- Transformer load monitoring equipment
- Electrical fire monitoring system
