NCP304HSQ27T1 Overview
This power management consists of 4 mounting terminals on which it can be mounted. A Tape & Reel (TR) package is used to package the power management. There are 1 functions included in this PMIC so that you can refer to them. Power management consists of 1 channels, each of which can be used independently. Please find attached SC-82A, SOT-343 functions for your reference in this IC power. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. According to the specification, the package's peak reflow temperature is specified to be 240. Manage ics operate at 1.5V supply voltages. In a 1 supply voltage, the PMIC chip conducts. Surface Mount mounts power management on the wall. There is a subcategory of this power ic known as Power Management Circuits. In total, IC powers are 4 pins on the board. Pin count of the power management is 4. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 800mV volts. Voltage (Vsup) shouldn't exceed 10V volts in this PMIC. Surface Mount mounting is recommended. Temperature setting for the supervisors should be -40°C~85°C TA. Power management has an output of Push-Pull, Totem Pole during operation. Supplied with a operating current of 1μA, this PMIC is capable of fully function as specified. It is always advisable to use NCP304, the base supervisor number, when searching for similar PMICs from the manufacturer.
NCP304HSQ27T1 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 800mV
1μA operating supply current
NCP304HSQ27T1 Applications
There are a lot of ON Semiconductor NCP304HSQ27T1 Voltage Supervisors applications.
- Battery cars
- Detection of phase imbalance
- Power communication system
- Smart meter
- DSP
- DVR
- FPGA design
- Utility meter
- Battery-powered equipment
- Power distribution systems of ICU
