MAX16056ATA26+T Overview
This voltage supervisor has a total of 8 mounting terminals that can be used for mounting. A Tape & Reel (TR) package is used to package the power management. The purpose of this IC management is to provide you with a reference of 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. In this IC management you will find 8-WDFN Exposed Pad functions for you to refer to. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. According to the specification, the package's peak reflow temperature is specified to be NOT SPECIFIED. A supply voltage of 1.8V is used to conduct the PMIC chip. Power management conducts at a voltage of 1. The power management is mounted by Surface Mount. A IC power such as this can be classified as a Power Management Circuits power management system. In total, IC powers are 8 pins on the board. 8 pins make up the power management. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1.1V, which is the minimum supply voltage that should be applied. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. Power management recommends the Surface Mount mounting type. You should set the supervisor's temperature during -40°C~125°C TA . Power management has an output of Push-Pull, Totem Pole during operation. It is estimated that the voltage supervisor's supply current is 142nA. It is always advisable to use MAX16056, the base supervisor number, when searching for similar PMICs from the manufacturer.
MAX16056ATA26+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
142nA operating supply current
MAX16056ATA26+T Applications
There are a lot of Maxim Integrated MAX16056ATA26+T Voltage Supervisors applications.
- Display equipment
- Battery-powered equipment
- Urban rail transit weak current power monitoring
- Utility meter
- Refrigeration
- Battery cars
- Electric heating appliances
- Telecommunications equipment
- Detection of phase loss
- Network equipment
