NCP301LSN46T1G Overview
As you can see, this power management is mounted through 5 terminals. In terms of packaging, power management follows the Tape & Reel (TR) model. As a reference, this IC management includes 1 functions for your convenience. This power managment ic consists of 1 channels, each of which can be used independently. For your reference, this PMIC includes a list of SOT-23-5 Thin, TSOT-23-5 functions. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. During operation, the power ic is supplied with a voltage of 1.5V. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. Surface Mount mounts IC management. This power ic can be sub-categorized as Power Management Circuits. It has a total of 5 pins that are attached to IC management. This power management system has 5 pins. It is recommended that Vsup should not be less than 800mV for this IC power. In this PMIC, the maximum supply voltage (Vsup) should not exceed 10V volts. The recommended mounting type is Surface Mount. We recommend setting the supervisors to -40°C~125°C TA degrees. During operation, this power management system outputs Open Drain or Open Collector. As far as the supply current of the power management is concerned, it is 500nA. To find similar IC managements from the manufacturer, you can always search by NCP301.
NCP301LSN46T1G Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 800mV
500nA operating supply current
NCP301LSN46T1G Applications
There are a lot of ON Semiconductor NCP301LSN46T1G Voltage Supervisors applications.
- Insulation fault location system
- Important electronics for automotive safety
- Consumer electronics
- Automotive permanent magnet synchronous motors
- Digitally controlled LDO regulators circuit
- External alarm
- Power distribution systems of operating room
- Utility meter
- Military electronics
- Precision measurement
