MP6400DG-33-LF-Z Overview
This voltage supervisor has a total of 6 mounting terminals that can be used for mounting. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. There are 1 functions included in this PMIC so that you can refer to them. It is possible to find on this power management a series of 1 channels. Please refer to power management for 6-VDFN Exposed Pad functions. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. Specifies a reflow peak temperature of 260 for the package during reflow. The supervisor is always powered by a 3.3V volt supply. Power management conducts at a voltage of 1. Using Surface Mount, IC management is mounted. A total of 6 pins are located on this power management. The pins of the power management system count 6. It is recommended that Vsup should not be less than 1.8V for this IC power. In this PMIC, the maximum supply voltage (Vsup) should not exceed 6V volts. In this case, Surface Mount is the recommended mounting type. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. While this power management is operating, it will output Open Drain or Open Collector as the output voltage.
MP6400DG-33-LF-Z Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.8V
MP6400DG-33-LF-Z Applications
There are a lot of Monolithic Power Systems Inc. MP6400DG-33-LF-Z Voltage Supervisors applications.
- Automotive permanent magnet synchronous motors
- Household appliances
- Low voltage/high power - AI, GPU
- DC stabilized power supply module
- Power distribution systems of CCU
- Leakage current detection
- Display equipment
- Utility meter
- Smart meter
- Medical-specific isolation transformer
