NCP301LSN42T1 Overview
Power management is mounted through 5 terminals. Tape & Reel (TR)-packaging is used. For your reference, this IC power includes a list of 1 functions. There are 1 channels on this power managment ic that can be found in a series. The purpose of this IC power is to provide you with a reference of SOT-23-5 Thin, TSOT-23-5 functions. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. As specified in the package specification, the peak reflow temperature of the package is set at 240. When 1.5V is applied to the power ic, it conducts. When a supply voltage of 1 is applied to the power ic, it conducts. Surface Mount mounts power management on the wall. Power Management Circuits is a subcategory of this PMIC chip. There are a total of 5 pins on power management. There are 5 pins on the supervisor. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 800mV volts. This IC power should be powered by no more than 10V volts of supply voltage (Vsup). The mounting type of the supervisors is Surface MountThe temperature of the supervisors should be set to this range: -40°C~125°C TA. As this power managment ic operates, it is able to produce an output voltage of Open Drain or Open Collector. Supplied with a operating current of 500nA, this PMIC is capable of fully function as specified. If you want to search for similar IC managements of this manufacturer, you can always refer to NCP301, which is the base power ics number.
NCP301LSN42T1 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 800mV
500nA operating supply current
NCP301LSN42T1 Applications
There are a lot of ON Semiconductor NCP301LSN42T1 Voltage Supervisors applications.
- Automotive power systems
- Power distribution systems of operating room
- Kitchen appliances
- Radio
- Urban rail transit weak current power monitoring
- Digitally controlled LDO regulators circuit
- DC stabilized power supply module
- emergency room
- Detection of phase imbalance
- Consumer electronics
