NCP301HSN09T1 Overview
There are 5 terminals connected to this power management, which makes it easy to mount. Packaging is in the form of a Tape & Reel (TR). Please refer to this PMIC for 1 functions. On this supervisor, there is a series of 1 channels that can be found. To assist you, this PMIC includes SOT-23-5 Thin, TSOT-23-5 functions. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. The package peak reflow temperature is specified to be 240. When 0.85V is applied to the power ic, it conducts. When 1 is applied to the power ic, it conducts. The power management is mounted by Surface Mount. There is a subcategory called Power Management Circuits for this power management. In total, IC powers are 5 pins on the board. 5 pins are on the supervisor. There should be a minimum voltage supply (Vsup) of 800mV for this PMIC. There should be no more than 10V volts of maximum supply voltage (Vsup) in this power management. In this case, Surface Mount is the recommended mounting type. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. While in operation, this supervisor has a voltage output of Open Drain or Open Collector. The supply current of the power management is 500nA. To find similar IC managements from the manufacturer, you can always search by NCP301. There is a requirement for 2.9V power to power this power management.
NCP301HSN09T1 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 800mV
500nA operating supply current
NCP301HSN09T1 Applications
There are a lot of ON Semiconductor NCP301HSN09T1 Voltage Supervisors applications.
- DC stabilized power supply module
- Network equipment
- Low voltage/high power - AI, GPU
- Dash board
- Military communications
- Battery cars
- Military electronics
- Battery-powered equipment
- Embedded computing
- Display equipment
