MAX693AMJE Overview
As you can see, this power management is mounted through 16 terminals. Tube-packaging is used. There are 1 functions included in this PMIC so that you can refer to them. On this supervisor, there is a series of 1 channels that can be found. The purpose of this IC power is to provide you with a reference of 16-CDIP (0.300, 7.62mm) functions. There are a lot of similarities between this IC power and other Battery Backup Circuit products. Packages are specified to have an average peak reflow temperature of 245. IC management conducts in a 4.5V-voltage supply. Power ics operate at 1 supply voltages. The mount is provided by Through Hole. It is possible to subcategorize this power ic as a Power Management Circuits chip. Taking into account all of the pins, this power management has a total of 16. It is recommended that Vsup should not be less than 0V for this IC power. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. Through Hole is the recommended mounting type. You should set the supervisor's temperature during -55°C~125°C TA . Power management has an output of Push-Pull, Push-Pull during operation. The supply current of the power management is 100μA. A similar IC managements number of the manufacturer can always be found by using MAX693, the base power ics number. The power management must be powered by 5V volts to function properly. At most, voltage supervisor can operate at a supply temperature of 100μA.
MAX693AMJE Features
Battery Backup Circuit type
Minimum supply voltage of 0V
100μA operating supply current
MAX693AMJE Applications
There are a lot of Maxim Integrated MAX693AMJE Voltage Supervisors applications.
- Computer applications
- emergency room
- Household appliances
- Detection of phase sequence
- Data storage applications
- Smart meter
- Leakage current detection
- Power distribution systems of infant care room
- Automotive permanent magnet synchronous motors
- Fire equipment power monitoring system
