NCP300LSN20T1 Overview
A total of 5 terminals are used to mount this power management. Tape & Reel (TR)-packaging is used. Please find attached 1 functions for your reference in this IC power. There are 1 channels available on this supervisor, and each channel has a different function. Please refer to power management for SOT-23-5 Thin, TSOT-23-5 functions. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. The package peak reflow temperature is specified to be 240. IC management conducts at a voltage of 1.5V. IC management is possible to find a succession of 1 voltages that have been checked. Surface Mount mounts power management on the wall. It is possible to subcategorize this power ic as a Power Management Circuits chip. 5 pins are present in total in this power management. There are 5 pins on the supervisor. Supply voltage (Vsup) should be at least 800mV for this power management. This IC power should be powered by no more than 10V volts of supply voltage (Vsup). The recommended mounting type is Surface Mount. It is recommended to set the supervisor's temperature to this range: -40°C~125°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. There is a 500nA supply current present in the power management. As well as this, there are other features to mention such as [0], for example. A similar IC managements number of the manufacturer can always be found by using NCP300, the base power ics number.
NCP300LSN20T1 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 800mV
500nA operating supply current
NCP300LSN20T1 Applications
There are a lot of ON Semiconductor NCP300LSN20T1 Voltage Supervisors applications.
- Electrical fire monitoring system
- Low voltage/high power - AI, GPU
- Satellite navigation
- Radio
- Detection of phase loss
- Power distribution systems of CCU
- Battery cars
- Transformer load monitoring equipment
- emergency room
- Personal computers
