MAX6466UK19+T Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 5 in total. In terms of packaging, power management follows the Tape & Reel (TR) model. In this IC power you will find 1 functions for you to refer to. There are 1 channels on this power managment ic that can be found in a series. In this IC management you will find SC-74A, SOT-753 functions for you to refer to. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. During operation, the power ic is supplied with a voltage of 3.6V. A supply voltage of 1 is used to conduct the PMIC chip. The mount is provided by Surface Mount. In total, IC powers are 5 pins on the board. This power management system has 5 pins. Supply voltage (Vsup) should be at least 1.2V for this power management. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 6V volts. The recommended mounting type is Surface Mount. The supervisors should be set to the following temperature: -40°C~125°C TA. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. For this power management, there is an 3.5μA volt supply current. It is always advisable to use MAX6466, the base supervisor number, when searching for similar PMICs from the manufacturer. Voltage supervisor can work with a supply temperature of 3.5μA at the most.
MAX6466UK19+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
3.5μA operating supply current
MAX6466UK19+T Applications
There are a lot of Maxim Integrated MAX6466UK19+T Voltage Supervisors applications.
- Refrigeration
- Power distribution systems of infant care room
- Medical-specific isolation transformer
- Microprocessor system
- Digitally controlled LDO regulators circuit
- Automotive permanent magnet synchronous motors
- Medical-specific insulation monitor
- emergency room
- WiFi router
- Cloud computing
