NCP300LSN185T1 Overview
There are 5 terminals connected to this power management, which makes it easy to mount. Power management is packaged in a Tape & Reel (TR) way. The purpose of this IC management is to provide you with a reference of 1 functions. There are 1 channels on this power managment ic that can be found in a series. As a reference, this IC power includes SOT-23-5 Thin, TSOT-23-5 functions for your convenience. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. Specifies a reflow peak temperature of 240 for the package during reflow. The supervisor is always powered by a 1.5V volt supply. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. Power management is included in the Surface Mount mount. There is a subcategory called Power Management Circuits for this power management. There are a total of 5 pins on power management. This power management has 5 pins. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 800mV volts. During this IC power, the maximum supply voltage (Vsup) should not exceed 10V volts. Surface Mount mounting is recommended. The supervisors should be set to the following temperature: -40°C~125°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. The supervisor's supply current is specified to 500nA. It is always advisable to use NCP300, the base supervisor number, when searching for similar PMICs from the manufacturer.
NCP300LSN185T1 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 800mV
500nA operating supply current
NCP300LSN185T1 Applications
There are a lot of ON Semiconductor NCP300LSN185T1 Voltage Supervisors applications.
- Stable power system
- Set top box
- Unattended substation automation
- Military communications
- Embedded computing
- Analog circuit
- Efficient information transmission
- Detection of phase sequence
- DVR
- Smart meter
