NB3N501DG Overview
The Tube method is used for packaging clock ICs. Clock PLL is embedded in the 8-SOIC (0.154, 3.90mm Width) package. There are 8 terminations found in the file. Clock generator ics require a voltage of 5V. This clock generator receives its inputs from Clock, Crystal, which is designed to be the clock source. A total of 1 circuits are implemented to access the full performance of the electrical part. RF synthesizers based on this clock provide frequencies up to 160MHz maximum. A Surface Mount-shaped electrical component makes it convenient to mount on a panel. Incorporating CLOCK GENERATOR, OTHER uPs/uCs/Peripheral ICs, this RF synthesizer features CLOCK GENERATOR, OTHER. Clock generator ic works with 3V~5.25V. Using the test statistics, we estimate that the ambient temperature should be -40°C~85°C. CMOS, TTL is designed for clock generator's output. This clock-generating IC is a 8-bit device designed explicitly for microprocessors. The related electronic parts of part number NB3N501 are listed below. There is an available 8 pin on the PLL. Clock Generators-type frequency generators are usually classified as this type. IT ALSO OPERATES AT 3.3V SUPPLY can also be founded when using frequency generators. Clock PLL has 2 signal outputs to maximi2e output frequency. By operating at a frequency of 190MHz, RF synthesizer is able to reali190MHze high efficiency. For the time clock generator to operate properly, 20mA of supply current are required. This RF synthesizer operation requires a maximum current of 20mA.
NB3N501DG Features
Available in the 8-SOIC (0.154, 3.90mm Width)
Supply voltage of 5V
NB3N501DG Applications
There are a lot of ON Semiconductor NB3N501DG Clock Generators applications.
- Myriad digital applications
- FSK demodulators
- Infotainment systems
- Signal analyzer
- Radar
- Pagers
- PMR (Professional Mobile Radio)
- Microwave radio
- Coherent carrier tracking
- Pulsed digital systems
