NB2308AI2DT Overview
As a clock IC, it uses the Tube package. 16-TSSOP (0.173, 4.40mm Width) contains this Clock PLL. When reflowed, this frequency generator can withstand a maximum temperature of NOT SPECIFIED. As a result, frequency synthesizers can be found to contain 16 terminations. For this clock generator ic, a voltage of 3.3V is required. This Clock PLL will be fed by Clock as its input. There are 1 circuits implemented in order to achieve full performance from this electronic part. Providing a maximum frequency of 133.3MHz, this clock-based RF synthesizer is suitable for a variety of applications. The Surface Mount allows this electrical component to be easily installed on the panel. It would be possible to supply this clock PLL with 3.6V of power. For safety reasons, this frequency generator's supply voltage should remain above 3V. There are 3V~3.6V different supply voltages that can be provided for this RF synthesizer. Based on test statistics, ambient temperature should be set at -40°C~85°C. This is an electronic part that can be classified as a Zero Delay Buffer in this case. In particular, this clock PLL is designed to be used with microprocessors. NB2308A is the base part number for finding related electronic parts. There is a 16 pin that is available on the digital clock generator. The maximum supply voltage that clock generator can handle is 3.3V. At 0.4 ns Max, this analog clock generator exhibits low timing skew. There are 8 pins that are configured to enable high true output on this analog clock generator.
NB2308AI2DT Features
Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
8 true outputs
NB2308AI2DT Applications
There are a lot of ON Semiconductor
NB2308AI2DT Clock Generators applications.
- Sampling clocks for ADC and DAC
- 1 Gigabit Ethernet
- 10 Gigabit Ethernet
- FPGA and processor clocks
- Line cards used in telephone exchange
- Fiber Channel
- PCI express cards
- Infotainment systems
- Medical equipment
- Multi-function printers
