NB2305AC1DTR2G Overview
Clock ICs are packaged using the Tape & Reel (TR) method. In the 8-TSSOP (0.173, 4.40mm Width) package, there is an embedded clock generator. A maximum temperature of 260 can be sustained by this clock generator ic during reflowing. There are a total of 8 terminations in this file. A voltage of 3.3V should be applied to this electronic frequency generator. In this case, Clock is designed to be the input of the clock generator. To access the electronic component's full performance, 1 circuits are implemented. The frequency generator has a maximum frequency of 133.33MHz. Thanks to the Surface Mount, this electric component can easily be installed on a panel. There is a maximum voltage of 3.6V for this clock generator. Keeping the supply voltage for this frequency synthesizer above 3V is recommended for safety reasons. There are 3V~3.6V available for use with this clock PLL. Test statistics suggest setting the ambient temperature at 0°C~70°C, which is 0°C~70°C. It is possible to classify this electronic component as a Zero Delay Buffer. An IC that generates clocks specifically for microprocessors, this clock PLL is 8-bits in si8e. The related electrical components for the base part number NB2305A can be found below. A 8 pin is available on the clock PLL. Clock PLL is capable of handling a voltage of 3.3V. The timing skew of this frequency synthesizer is low at 0.25 nsmax. There are 4 pins configured for enabling high true outputs on this clock generator.
NB2305AC1DTR2G Features
Available in the 8-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
4 true outputs
NB2305AC1DTR2G Applications
There are a lot of ON Semiconductor
NB2305AC1DTR2G Clock Generators applications.
- Wide area power system
- Digital circuits
- Wireless base station for LTE, LTE-advanced
- Picocells, femtocells and small cells
- Sampling clocks for ADC and DAC
- 1 Gigabit Ethernet
- 10 Gigabit Ethernet
- FPGA and processor clocks
- Line cards used in telephone exchange
- Fiber Channel
