NB2308AC1HDTG Overview
Clock ICs are packaged using the Tube method. There is a clock generator embedded in the 16-TSSOP (0.173, 4.40mm Width) package. As you can see, it consists of 16 terminations. A voltage of 3.3V should be applied to this electronic frequency generator. Clock is designed for clock generator's input. For a full understanding of the electronic part's performance, 1 circuits are implemented. The frequency generator has a maximum frequency of 133.3MHz. The Surface Mount allows the electrical component to be installed conveniently on the panel. This clock generator would require a maximum supply voltage of 3.6V. Safety considerations dictate that the supply voltage for this frequency synthesizer should be greater than 3V. Clock generators should operate with the voltage supply of 3V~3.6V. Using the test statistics, it is estimated that the ambient temperature should be set to 0°C~70°C. This is an electronic part that can be classified as a Zero Delay Buffer in this case. Microprocessor-specific clock PLL with 16 bits. Related electrical parts can be found for the base part number NB2308A. There is an available 16 pin on the clock generators. RF synthesizers can handle a voltage of 3.3V as the supply voltage. There is a low timing skew at 0.2 nsmax with this RF synthesizer. There are 8 true outputs.
NB2308AC1HDTG Features
Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
8 true outputs
NB2308AC1HDTG Applications
There are a lot of ON Semiconductor NB2308AC1HDTG Clock Generators applications.
- Instrument
- Digital switching systems
- Wide area power system
- Pagers
- Navigation, positioning and surveillance system for aircraft, ships and ships
- Signal demodulation
- DVD add-on cards for multimedia PCs
- Aerospace and defense
- Phase modulation cellular systems
- Radio receivers
