NB2305AI1HDG Overview
As a clock IC, it is packaged by the Tube method. The 8-SOIC (0.154, 3.90mm Width) package embeds this Clock PLL. The frequency generator is capable of withstanding a maximum temperature of 260 during reflowing. As you can see, it consists of 8 terminations. Basically, this time clock generator needs a voltage of 3.3V. There is a Clock PLL called CMOS which is designed to be the input to this clock generator. Using 1 circuits, the electronic part's full performance can be accessed. A Surface Mount-shaped electrical component makes it convenient to mount on a panel. The maximum voltage this clock PLL can handle is 3.6V. A maximum voltage of 3V should be used for this frequency generator for safety reasons. There should be 3V~3.6V provided with this RF synthesizer. As determined by the test statistics, the ambient temperature should be set to -40°C~85°C. As far as this electronic part is concerned, it can be classified as a Zero Delay Buffer component. Microprocessor-specific clock PLL with 8 bits. The related electronic parts of part number NB2305A are listed below. There are 8 pins that are available on the clock PLL. RF synthesizers can handle a voltage of 3.3V as the supply voltage. The clock PLL is generally classified as a Clock Drivers device. At maximum 0.25 ns, this analog clock generator has low timing skew. 4 pins enable the digital clock generator's true output. High efficiency is achieved when operating at a frequency of 133MHz.
NB2305AI1HDG Features
Available in the 8-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
4 true outputs
NB2305AI1HDG Applications
There are a lot of ON Semiconductor
NB2305AI1HDG Clock Generators applications.
- Picocells, femtocells and small cells
- Sampling clocks for ADC and DAC
- 1 Gigabit Ethernet
- 10 Gigabit Ethernet
- FPGA and processor clocks
- Line cards used in telephone exchange
- Fiber Channel
- PCI express cards
- Infotainment systems
- Medical equipment
