MPSA13RLRA Overview
As explained above, DC current gain takes into account the rate at which the base current flows through the collector current; therefore, DC current gain for this device is 10000 @ 100mA 5V.When VCE saturation is 1.5V @ 100μA, 100mA, transistor means Ic has reached transistors maximum value (saturated).For high efficiency, the continuous collector voltage must be kept at 500mA.If the emitter base voltage is kept at 10V, a high level of efficiency can be achieved.Normally, a fuse's current rating refers to how much current it can carry without deteriorating too much, which in this case is 500mA.There is a transition frequency of 125MHz in the part.Breakdown input voltage is 30V volts.When collector current reaches its maximum, it can reach 500mA volts.
MPSA13RLRA Features
the DC current gain for this device is 10000 @ 100mA 5V
the vce saturation(Max) is 1.5V @ 100μA, 100mA
the emitter base voltage is kept at 10V
the current rating of this device is 500mA
a transition frequency of 125MHz
MPSA13RLRA Applications
There are a lot of ON Semiconductor MPSA13RLRA applications of single BJT transistors.
- Driver
- Interface
- Muting
- Inverter
