MC74LVX374DWR2G Overview
The flip flop is packaged in 20-SOIC (0.295, 7.50mm Width). As part of the package Tape & Reel (TR), it is embedded. The output it is configured with uses Tri-State, Non-Inverted. It is configured with a trigger that uses Positive Edge. Surface Mountis occupied by this electronic component. A supply voltage of 2V~3.6V is required for operation. In this case, the operating temperature is -40°C~85°C TA. It belongs to the type D-Typeof flip flops. The FPGA belongs to the 74LVX series. Its output frequency should not exceed 95MHz. There are 1 elements in it. This process consumes 4μA quiescents. In 20terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. Members of the 74LVX374family make up this object. Power is provided by a 2.7V supply. JK flip flop input capacitance is 4pF farads. It belongs to the family of electronic devices known as LV/LV-A/LVX/H. Electronic part Surface Mountis mounted in the way. This board is designed with 20pins on it. This device exhibits a clock edge trigger type of Positive Edge. This RS flip flops is a part number FF/Latches. An electronic part designed with 8bits is used in this application. The supply voltage (Vsup) should be maintained above 2V for normal operation. 8 circuits are used to achieve its superior flexibility. Due to its reliability, this T flip flop is well suited for TAPE AND REEL. The flip flop contains 2ports. The JK flip flop is with 3 output lines to operate.
MC74LVX374DWR2G Features
Tape & Reel (TR) package
74LVX series
20 pins
8 Bits
MC74LVX374DWR2G Applications
There are a lot of ON Semiconductor MC74LVX374DWR2G Flip Flops applications.
- CMOS Process
- Supports Live Insertion
- ATE
- Bus hold
- Single Down Count-Control Line
- Registers
- Data storage
- Clock pulse
- Counters
- Balanced 24 mA output drivers
