MC74HCT374ADTR2G Overview
20-TSSOP (0.173, 4.40mm Width)is the way it is packaged. It is included in the package Tape & Reel (TR). Currently, the output is configured to use Tri-State, Non-Inverted. Positive Edgeis the trigger it is configured with. In this case, the electronic component is mounted in the way of Surface Mount. It operates with a supply voltage of 4.5V~5.5V. In this case, the operating temperature is -55°C~125°C TA. This logic flip flop is classified as type D-Type. The FPGA belongs to the 74HCT series. In order for it to function properly, its output frequency should not exceed 30MHz. In total, there are 1 elements. There are 20 terminations,JK flip flop belongs to 74HCT374 family. It is powered by a voltage of 5V . JK flip flop input capacitance is 10pF farads. Devices in the HCTfamily are electronic devices. It is mounted in the way of Surface Mount. Basically, it is designed with a set of 20 pins. It has a clock edge trigger type of Positive Edge. The part is included in FF/Latches. There are 8bits in this flip flop. Due to its reliability, this T flip flop is well suited for TAPE AND REEL. It runs on 5Vvolts of power. There are 2 ports embedded in the flip flops. In order to achieve high efficiency, the supply voltage should be maintained at 5V. There are 3 output lines in this JK flip flop. It consumes a total of 4μA quiescent current at any given time. Currently, there are 8 channels available.
MC74HCT374ADTR2G Features
Tape & Reel (TR) package
74HCT series
20 pins
8 Bits
5V power supplies
MC74HCT374ADTR2G Applications
There are a lot of ON Semiconductor MC74HCT374ADTR2G Flip Flops applications.
- Buffered Clock
- Memory
- Storage registers
- Frequency Divider circuits
- Single Down Count-Control Line
- Power down protection
- Data storage
- Clock pulse
- Computing
- Counters
