MC74HC390ANG Overview
The device is packaged in the 16-DIP (0.300, 7.62mm)type. This configuration uses 16terminations. By supplying 5Vwith a voltage of 5V , the device can be operated in a completely flexible manner. An interconnection of 2elements is provided by wires. All component pins are equal to 16. There is a package in the form of Tube. As part of the circuit, there are 16pins that connect other components. The Through Holeway is used to mount it. In this case, it belongs to the family of [0]. Due to the fact that it is a member of the 74HCseries, it has a wide range of applications. Logic type Counter, Decade is adopted. Ideally, the operating temperature should be set to -55°C~125°C. This device is mounted in the Through Holeposition. As long as the supply voltage is set to [0], the device can operate with a greater degree of reliability. As far as the device is concerned, there are 3bits of information. Based on the Pbfree code, the result may be yes. It is important to note that ONE FUNCTION HAS 1 BITare really important features of this electronic device. Further related parts may be found under the base part number 74HC390. For its packaging, RAILis employed. As low as 2V Vsup is the minimum supply voltage. The frequency of the system is 50MHz. It is possible to provide a voltage up to 6V (Vsup).
MC74HC390ANG Features
Embedded in the 16-DIP (0.300, 7.62mm) package
ONE FUNCTION HAS 1 BIT
Frequency of 50MHz
MC74HC390ANG Applications
There are a lot of ON Semiconductor
MC74HC390ANG Counters & Dividers applications.
- Analog multiplexing and demultiplexing
- Digital multiplexing and demultiplexing
- Signal gating
- Frequency dividing circuits
- Time delay circuits
- Communications Digital Frequency Synthesizers;
- VHF, UHF, FM, AM, etc.
- Fixed or Programmable Frequency Division
- Time Out Timer for Consumer-Application Industrial Controls
- Timing applications
