CD74HC393M Overview
The device is packaged in the 14-SOIC (0.154, 3.90mm Width)type. This configuration uses 14terminations. By supplying 4.5Vwith a voltage of 4.5V , the device can be operated in a completely flexible manner. An interconnection of 2elements is provided by wires. All component pins are equal to 14. There is a package in the form of Tube. As part of the circuit, there are 14pins that connect other components. The Surface Mountway is used to mount it. In this case, it belongs to the family of [0]. Due to the fact that it is a member of the 74HCseries, it has a wide range of applications. Logic type Binary Counter is adopted. Ideally, the operating temperature should be set to -55°C~125°C. This device is mounted in the Surface Mountposition. As long as the supply voltage is set to [0], the device can operate with a greater degree of reliability. An array consists of 4bits for each element. Based on the Pbfree code, the result may be yes. Further related parts may be found under the base part number 74HC393. As low as 2V Vsup is the minimum supply voltage. The frequency of the system is 35MHz. It is possible to provide a voltage up to 6V (Vsup). The device consumes a quiescent current of 8μA volts.
CD74HC393M Features
Embedded in the 14-SOIC (0.154, 3.90mm Width) package
4 bits per element
Frequency of 35MHz
CD74HC393M Applications
There are a lot of Texas Instruments
CD74HC393M Counters & Dividers applications.
- Analog multiplexing and demultiplexing
- Digital multiplexing and demultiplexing
- Signal gating
- Frequency dividing circuits
- Time delay circuits
- Communications Digital Frequency Synthesizers;
- VHF, UHF, FM, AM, etc.
- Fixed or Programmable Frequency Division
- Time Out Timer for Consumer-Application Industrial Controls
- Timing applications
