MC74ACT574NG Overview
20-DIP (0.300, 7.62mm)is the packaging method. The Tubepackage contains it. T flip flop uses Tri-State, Non-Invertedas its output configuration. It is configured with a trigger that uses a value of Positive Edge. There is an electric part mounted in the way of Through Hole. A voltage of 4.5V~5.5Vis used as the supply voltage. It is operating at a temperature of -40°C~85°C TA. There is D-Type type of electronic flip flop associated with this device. The 74ACTseries comprises this type of FPGA. There should be no greater frequency than 100MHzon its output. In total, it contains 1 elements. It consumes 8μA of quiescent current without being affected by external factors. There are 20 terminations,The object belongs to the 74ACT574 family. A voltage of 5V is used to power it. Input capacitance of this device is 4.5pF farads. It belongs to the family of electronic devices known as ACT. A part of the electronic system is mounted in the way of Through Hole. As you can see from the design, it has pins with 20. This device's clock edge trigger type is Positive Edge. The part is included in FF/Latches. The flip flop is designed with 8bits. Using 8 circuits, it is highly flexible. The system runs on a power supply of 5V watts. A total of 2ports are embedded in the D flip flop. The supply voltage should be maintained at 5V for high efficiency. In addition to its maximum design flexibility, the output current of the T flip flop is 24mA. The JK flip flop is with 3 output lines to operate.
MC74ACT574NG Features
Tube package
74ACT series
20 pins
8 Bits
5V power supplies
MC74ACT574NG Applications
There are a lot of ON Semiconductor MC74ACT574NG Flip Flops applications.
- Memory
- Automotive
- Frequency Dividers
- Buffer registers
- Frequency division
- Frequency Divider circuits
- Control circuits
- Differential Individual
- CMOS Process
- Functionally equivalent to the MC10/100EL29
