MC74LVX574MEL Overview
The flip flop is packaged in 20-SOIC (0.209, 5.30mm Width). The Tape & Reel (TR)package contains it. Currently, the output is configured to use Tri-State, Non-Inverted. There is a trigger configured with Positive Edge. The electronic part is mounted in the way of Surface Mount. The JK flip flop operates at 2V~3.6Vvolts. Temperature is set to -40°C~85°C TA. D-Typedescribes this flip flop. It is a type of FPGA belonging to the 74LVX series. Its output frequency should not exceed 75MHz. The list contains 1 elements. As a result, it consumes 4μA quiescent current. Terminations are 20. D latch belongs to the 74LVX574 family. It is powered by a voltage of 2.7V . Its input capacitance is 4pFfarads. Devices in the LV/LV-A/LVX/Hfamily are electronic devices. In this case, the electronic component is mounted in the way of Surface Mount. Basically, it is designed with a set of 20 pins. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. This device is part of the FF/Latchesbase part number family. 8bits are used in its design. The supply voltage (Vsup) should be maintained above 2V for normal operation. To achieve this superior flexibility, 8 circuits are used. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TAPE AND REEL. The D flip flop is embedded with 2ports. It has 3 output lines to operate.
MC74LVX574MEL Features
Tape & Reel (TR) package
74LVX series
20 pins
8 Bits
MC74LVX574MEL Applications
There are a lot of ON Semiconductor MC74LVX574MEL Flip Flops applications.
- Communications
- ESD protection
- Storage Registers
- Shift registers
- Balanced 24 mA output drivers
- 2 – Bit synchronous counter
- Safety Clamp
- CMOS Process
- Differential Individual
- Data Synchronizers
