Name: MC14053BCPG
Brand: ON Semiconductor
SKU: MC14053BCPG
Availability: InStock

new-10%

MC14053BCPG

Manufacturer part number:MC14053BCPG

Manufacturer:ON Semiconductor

Description:SPDT 280Ohm Analog Switches BREAK-BEFORE-MAKE MC14053B 16 Pins 100nA 5V 16-DIP (0.300, 7.62mm)

Case Package:SOT-23

Datasheet:MC14053BCPG Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Mounting Type	Through Hole
Package / Case	16-DIP (0.300, 7.62mm)
Surface Mount	NO
Number of Pins	16
Operating Temperature	-55°C~125°C TA
Packaging	Tube
Published	2006
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	1.05kOhm
Terminal Finish	Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	500mW
Technology	CMOS
Number of Functions	3
Supply Voltage	5V
Terminal Pitch	2.54mm
Base Part Number	MC14053B
Pin Count	16
Power Supplies	5/15V
Number of Channels	2
Voltage	18V
Max Supply Voltage	18V
Min Supply Voltage	3V
Analog IC - Other Type	SINGLE-ENDED MULTIPLEXER
Power Dissipation	500mW
Propagation Delay	65 ns
Turn On Delay Time	550 ns
Logic Function	Demultiplexer, Multiplexer
Number of Inputs	6
Supply Type	Dual
Bandwidth	17MHz
Turn-Off Delay Time	550 ns
Number of Gates	3
On-State Resistance (Max)	280Ohm
High Level Output Current	25mA
Low Level Output Current	25mA
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	50 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	7.5pF
On-state Resistance Match-Nom	25Ohm
Switch Circuit	SPDT
Channel-to-Channel Matching (ΔRon)	10 Ω
Switching	BREAK-BEFORE-MAKE
Voltage - Supply, Single (V+)	3V~18V
Signal Current-Max	0.025A
Height	3.43mm
Length	19.55mm
Width	6.85mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	RoHS Compliant
Lead Free	Lead Free

MC14053BCPG Product Details

MC14053BCPG Overview

Packed in 16-DIP (0.300, 7.62mm), the electronic component is convenient for shipping overseas. This high-reliability packaging method uses advanced packaging methods Tube. The multiplexer is located in Through Hole. Multiplexers and demultiplexers have a ratio of 2:1. Temperatures around -55°C~125°C TA are extended for operation. 16 terminations have been made so far. The electronic part provides high-quality output because it has 2 channels. If the voltage supply is 5V volts, the electrical component should be turned on and run. 16 pins are injected to the electronic part body. Based on SPDT switching circuits, these analog multiplexers work. Look for analog switch ic variants by searching with MC14053B. As far as internal resistance is concerned, it has 1.05kOhm. Datasheets for functions of 16 pins are available. It is a typical Multiplexer or Switches analog multiplexer. An abnormal situation would be for the switch device to be supplied with a voltage greater than 18V. The analog switch ic is of the Dual supply type and is cost-effective. It is recommended to use 3V as the lowest voltage for the electrical part. Analogue multiplexers require a 3V~18V voltage to drain from a single voltage supply. There is an analog IC SINGLE-ENDED MULTIPLEXER integrated with this board. There are 6 inputs to be operated. 17MHz-bandwidths can be used to transfer data between multiplexers.