Name: DG408LAK
Brand: Vishay Siliconix
SKU: DG408LAK
Availability: InStock

new-10%

DG408LAK

Manufacturer part number:DG408LAK

Manufacturer:Vishay Siliconix

Description:55ns, 25ns 29Ohm DUAL Analog Switches BREAK-BEFORE-MAKE 16 Pins 1nA 5V 16-DIP (0.300, 7.62mm)

Case Package:SOT-23

Datasheet:DG408LAK Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	14 Weeks
Mounting Type	Through Hole
Package / Case	16-DIP (0.300, 7.62mm)
Surface Mount	NO
Number of Pins	16
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	2012
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	29Ohm
Subcategory	Multiplexer or Switches
Technology	BICMOS
Terminal Position	DUAL
Peak Reflow Temperature (Cel)	NOT SPECIFIED
Number of Functions	1
Supply Voltage	5V
Terminal Pitch	2.54mm
Reach Compliance Code	unknown
Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED
Pin Count	16
Qualification Status	Not Qualified
Number of Channels	8
Number of Circuits	1
Max Supply Voltage	12V
Min Supply Voltage	3V
Analog IC - Other Type	SINGLE-ENDED MULTIPLEXER
Voltage - Supply, Single/Dual (±)	2.7V~12V ±3V~6V
Supply Current-Max (Isup)	0.7mA
Neg Supply Voltage-Nom (Vsup)	-5V
Max Dual Supply Voltage	6V
On-State Resistance (Max)	29Ohm
Min Dual Supply Voltage	3V
Multiplexer/Demultiplexer Circuit	8:1
Off-state Isolation-Nom	70 dB
Current - Leakage (IS(off)) (Max)	1nA
Channel Capacitance (CS(off), CD(off))	7pF 20pF
Switch Time (Ton, Toff) (Max)	55ns, 25ns
Charge Injection	1pC
Channel-to-Channel Matching (ΔRon)	1 Ω
Crosstalk	-82dB @ 100kHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	55ns
Switch-off Time-Max	40ns
Signal Current-Max	0.03A
Height Seated (Max)	5.08mm
Width	7.62mm
RoHS Status	Non-RoHS Compliant

DG408LAK Product Details

DG408LAK Overview

Packed in 16-DIP (0.300, 7.62mm), the electronic component is convenient for shipping overseas. Advanced packaging method Tube is used to provide high reliability. This analog switch is mounted in Through Hole. The ratio between the number of multiplexer and demultiplexer circuits is 8:1. Extended operating temperature around -40°C~85°C TA. There are 16 terminations totally. By its 8 channels, the electronic component provides high-quality output. With a 5V voltage supply, the electrical component should be turned on and run. 16 pins are injected to the electronic part body. This multiplexer is composed of 1 circuits. This digital multiplexer has 29Ohm internal resistance. Please refer to the datasheets for 16 pins functions. This switch device is a typical Multiplexer or Switches. In a normalsituation, users should not supply the switches with voltage higher than 12V. The lowest voltage fed to the electronic component should be 3V. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 6V. You should attach at least 3V voltage if you are using dual power supply. Integrated with SINGLE-ENDED MULTIPLEXER analog IC.