MC14022BDG Overview
The device is packaged in the 16-SOIC (0.154, 3.90mm Width)type. This configuration uses 16terminations. By supplying 5Vwith a voltage of 5V , the device can be operated in a completely flexible manner. All component pins are equal to 16. There is a package in the form of Tube. As part of the circuit, there are 16pins that connect other components. The Surface Mountway is used to mount it. Due to the fact that it is a member of the 4000Bseries, it has a wide range of applications. Logic type Binary Counter is adopted. Ideally, the operating temperature should be set to -55°C~125°C. This device is mounted in the Surface Mountposition. As long as the supply voltage is set to [0], the device can operate with a greater degree of reliability. An array consists of 4bits for each element. Based on the Pbfree code, the result may be yes. Further related parts may be found under the base part number 4022. For its packaging, RAILis employed. As low as 3V Vsup is the minimum supply voltage. The frequency of the system is 16MHz. There are 1 input lines that allow binary data to be input in the form of an on/off signal. In order for its basis to be configured, 8channels are designed.
MC14022BDG Features
Embedded in the 16-SOIC (0.154, 3.90mm Width) package
4 bits per element
Frequency of 16MHz
MC14022BDG Applications
There are a lot of ON Semiconductor
MC14022BDG Counters & Dividers applications.
- Analog multiplexing and demultiplexing
- Digital multiplexing and demultiplexing
- Signal gating
- Frequency dividing circuits
- Time delay circuits
- Communications Digital Frequency Synthesizers;
- VHF, UHF, FM, AM, etc.
- Fixed or Programmable Frequency Division
- Time Out Timer for Consumer-Application Industrial Controls
- Timing applications
