MC14013BDR2G Overview
It is packaged in the way of 14-SOIC (0.154, 3.90mm Width). You can find it in the Tape & Reel (TR)package. As configured, the output uses Differential. In the configuration of the trigger, Positive Edgeis used. Surface Mountis occupied by this electronic component. A supply voltage of 3V~18V is required for operation. The operating temperature is -55°C~125°C TA. It is an electronic flip flop with the type D-Type. In terms of FPGAs, it belongs to the 4000B series. It should not exceed 14MHzin terms of its output frequency. A total of 2elements are contained within it. This process consumes 4μA quiescents. The 4013 family contains this object. The input capacitance of this T flip flop is 5pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. It is mounted in the way of Surface Mount. There are 14pins on it. A Positive Edgeclock edge trigger is used in this device. An electronic part designed with 2bits is used in this application. The superior flexibility of this circuit is achieved by using 2 circuits. Its output current of 8.8mAallows for maximum design flexibility. It operates with 1 output lines. A total of 1input lines have been provided. In terms of quiescent current, it consumes 4μA . There is -4.2mA output current at the high level. In the low level output current setting, the current is set to 4.2mA. A temperature below 125°Cshould be used for operation. In order for the system to operate properly, the temperature should be higher than -55°C. Despite its minimal supply voltage of 3V, it is capable of operating. It is capable of supporting a maximum supply voltage of 18V. This can be achieved at a frequency of 14MHz.
MC14013BDR2G Features
Tape & Reel (TR) package
4000B series
14 pins
2 Bits
MC14013BDR2G Applications
There are a lot of ON Semiconductor MC14013BDR2G Flip Flops applications.
- QML qualified product
- CMOS Process
- Matched Rise and Fall
- Balanced Propagation Delays
- ESD performance
- Instrumentation
- Shift registers
- Data storage
- Computers
- Single Up Count-Control Line
