CD74HC109M96 Overview
In the form of 16-SOIC (0.154, 3.90mm Width), it has been packaged. It is contained within the Tape & Reel (TR)package. As configured, the output uses Differential. In the configuration of the trigger, Positive Edgeis used. There is an electric part mounted in the way of Surface Mount. A supply voltage of 2V~6V is required for operation. The operating temperature is -55°C~125°C TA. A flip flop of this type is classified as a JK Type. FPGAs belonging to the 74HCseries contain this type of chip. Its output frequency should not exceed 60MHz. In 16terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. If you search by 74HC109, you will find similar parts. An input voltage of 4.5Vpowers the D latch. The input capacitance of this T flip flop is 10pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. It is a member of the HC/UHfamily of D flip flop. There is an electronic part mounted in the way of Surface Mount. This board is designed with 16pins on it. Its clock edge trigger type is Positive Edge. The RS flip flops belongs to FF/Latch base part number. Vsup reaches 6V, the maximal supply voltage. It is imperative that the supply voltage (Vsup) is maintained above 2Vin order to ensure normal operation. The superior flexibility is achieved through the use of 2 circuits. Considering its reliability, this T flip flop is well suited for TR. Its output current of 5.2mAallows for maximum design flexibility. There is 4μA quiescent current consumption by it.
CD74HC109M96 Features
Tape & Reel (TR) package
74HC series
16 pins
CD74HC109M96 Applications
There are a lot of Texas Instruments CD74HC109M96 Flip Flops applications.
- Shift registers
- Frequency Divider circuits
- Cold spare funcion
- Matched Rise and Fall
- Data storage
- Balanced 24 mA output drivers
- Data transfer
- Supports Live Insertion
- Memory
- High Performance Logic for test systems
