MC100EP58DR2G Overview
Due to the lack of space on the board, digital switch is provided in the 8-SOIC (0.154, 3.90mm Width).The package is packaged in accordance with Tape & Reel (TR).For mounting, digital switch ic uses the method Surface Mount.The analog IC used in the multiplexers can be referred to as Multiplexer.The operating temperature of -40°C~85°C will not be susceptible to external factors.Using a ±3V~5.5V supply voltage provides digital controlled switch's superior flexibility for designers.Multiplexers of the 100EP series can be used in a wide range of applications.Among its basic features are 8 terminations.The base part number is 100EP58, which can also be used to find its logic switch related parts.The multiplexer's system is powered by 3.3V voltage.Currently, this turn signal switch has a total of 8 component pins.As a result, conductors end at GULL WING.There is a type of supply of Dual.A total of 8 pins are configured on this board.Surface Mount is the way it is mounted.Vsup should be kept at 3V to prevent some unnecessary failures.It is advisable to keep the maximum supply voltage (Vsup) at 5.5V so as to avoid some unnecessary failures.For mux switch's normal operation, power supply -4.5V is provided.This turn signal switch has 1 outputs designed for its operation.In accordance with TAPE AND REEL, switches can be packaged.It is possible to accept voltage levels through 2 input lines of multiplexers.It also provides improved characteristics of NECL MODE OPERATING RANGE: VCC = 0 V WITH VEE = -3.0 V TO -5.5 V.
MC100EP58DR2G Features
Supplied in the 8-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Dual
Power supplies of -4.5V
2 input lines
NECL MODE OPERATING RANGE: VCC = 0 V WITH VEE = -3.0 V TO -5.5 V
MC100EP58DR2G Applications
There are a lot of ON Semiconductor MC100EP58DR2G Signal Switches / Multiplexers / Decoders applications.
- Encrypted communications system
- Combinational circuit
- Transmission from the computer system of a satellite
- Microprocessor instruction decoding
- To select different devices in microprocessor output
- CPU memory location identification
- Relay
- Seven segment displays
- A robotic vehicle with the metal detector
- Frequency multiplexing system
