MC100EP451MNG Overview
The package is in the form of 32-VFQFN Exposed Pad. It is included in the package Tube. The output it is configured with uses Differential. This trigger uses the value Positive Edge. It is mounted in the way of Surface Mount. A supply voltage of -3V~-5.5V is required for operation. A temperature of -40°C~85°C TAis considered to be the operating temperature. This D latch has the type D-Type. It belongs to the 100EPseries of FPGAs. Its output frequency should not exceed 3GHz Hz. A total of 1 elements are present. During its operation, it consumes 135mA quiescent energy. 32terminations have occurred. The 100EP451 family contains this object. It is powered from a supply voltage of 3.3V. In this case, the electronic component is mounted in the way of Surface Mount. Basically, it is designed with a set of 32 pins. Its clock edge trigger type is Positive Edge. It is part of the Shift Registersbase part number family. An electronic part with 6bits has been designed. Vsup reaches its maximum value at 5.5V. The supply voltage (Vsup) should be kept above 3V for normal operation. The D latch runs on a voltage of -4.5V volts. With an output current of 50mA, it is possible to design the device in any way you want. It is reported that there are 6 input lines. NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5Vis also one of its characteristics. There is -50mA output current at the high level. It is set to 50mAfor the low level output current.
MC100EP451MNG Features
Tube package
100EP series
32 pins
6 Bits
-4.5V power supplies
MC100EP451MNG Applications
There are a lot of ON Semiconductor MC100EP451MNG Flip Flops applications.
- Memory
- ESD protection
- Consumer
- ESD performance
- Common Clocks
- Digital electronics systems
- Convert a momentary switch to a toggle switch
- Bounce elimination switch
- Computing
- Reduced system switching noise
