N74F574N,602 Overview
As a result, it is packaged as 20-DIP (0.300, 7.62mm). The package Tubecontains it. It is configured with Tri-State, Non-Invertedas an output. JK flip flop uses Positive Edgeas the trigger. Through Holeis positioned in the way of this electronic part. A 4.5V~5.5Vsupply voltage is required for it to operate. 0°C~70°C TAis the operating temperature. There is D-Type type of electronic flip flop associated with this device. JK flip flop belongs to the 74Fseries of FPGAs. Its output frequency should not exceed 180MHz Hz. D latch consists of 1 elements. It consumes 65mA of quiescent current without being affected by external factors. A total of 20 terminations have been made. Members of the 74F574family make up this object. The power supply voltage is 5V. This D flip flop belongs to the family of F/FAST. It is part of the FF/Latchesbase part number family. There is a 5.5Vmaximum supply voltage (Vsup). Normally, the supply voltage (Vsup) should be above 4.5V. The D latch runs on a voltage of 5V volts. The D flip flop has no ports embedded. In addition, you can refer to the additinal BROADSIDE VERSION OF 374; POWER OFF DISABLE OUTPUTS TO PERMIT LIVE INSERTION of the D latch.
N74F574N,602 Features
Tube package
74F series
5V power supplies
N74F574N,602 Applications
There are a lot of NXP USA Inc. N74F574N,602 Flip Flops applications.
- Divide a clock signal by 2 or 4
- Bus hold
- Asynchronous counter
- Data Synchronizers
- Memory
- Common Clocks
- Buffer registers
- Instrumentation
- Safety Clamp
- High Performance Logic for test systems
