MC100EP14DTR2G Overview
20-TSSOP (0.173, 4.40mm Width) case is available for the cut smart buffer. There is a case available for the circuit clock in Tape & Reel (TR). Under normal circumstances, 2GHz is the maximum value. A total of 20 terminations are present in it. Supply voltages of 3.3V allow for high efficiency. The circuit clock is mounted on Surface Mount. An electronic component classified as Fanout Buffer (Distribution), Multiplexer is categorized as such. Temperature -40°C~85°C is recommended for reliable performance. The clock switch should operate with a voltage of 3V~5.5VV. It's in the way of Surface Mount. There are 20 pins on the clock buffer. As a result, it produces ECL, PECL. A 20 pin is used for operation. It belongs to the family MC100EP14. The clock divider is contained within Clock Drivers. To ensure normal operation of the cut smart buffer, the supply voltage (Vsup) should always be kept above 3V. Default settings are set to output 5. It belongs to the 100EP series of electronic parts. In order to achieve maximum efficiency, the supply voltage should be kept at 3.3V.
MC100EP14DTR2G Features
20 terminations
The operating temperature of -40°C~85°C degrees
Clock Drivers subcategory
MC100EP14DTR2G Applications
There are a lot of ON Semiconductor MC100EP14DTR2G Clock Buffers & Drivers applications.
- Automatic test equipment
- Clock signal duplication
- Cell Phone (UMTS/WCDMA/GSM)
- Synchronous digital system
- Cloud computing
- Telecommunications
- FPGA
- DDR4 JEDEC standard RDIMM design
- Edge computing
- Tlecom applications
