CDCLVP111RHBT Overview
As far as the case type is concerned, the cut smart buffer is available in 32-VFQFN Exposed Pad. There is a case available for the circuit clock in Tape & Reel (TR). It is normal to operate with a value of 3.5GHz. A total of 32 terminations can be found in it. The supply voltage of 2.5V can be used to achieve high efficiency. The mount is made up of Surface Mount. Electronic parts classified as Fanout Buffer (Distribution), Multiplexer are considered to be safety components. It is recommended to set the temperature to -40°C~85°C so the system can perform reliably. It should be able to work with a power source of 2.375V~3.8VV. In the direction of Surface Mount, it is placed. There are 32 pins on timeing clock. There is a value of LVPECL as the output. During operation, 32 pins are used. It is a member of the CDCLVP111 family. A cut smart buffer of this type is contained in Clock Drivers. It belongs to the family of electronic gadgets known as 111. This is set to 3.8V for the maximum supply voltage. A voltage higher than 2.375V is necessary for normal operation of the system. By default, output 10 is set. Power for the clock buffer comes from a +-2.5/+-3.3V volt supply. By utilizing this gadget, one can also obtain LVECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.8V; ALSO OPERATES AT 3.3 V SUPPLY. It is based on the TR packing method.
CDCLVP111RHBT Features
32 terminations
The operating temperature of -40°C~85°C degrees
Clock Drivers subcategory
CDCLVP111RHBT Applications
There are a lot of Texas Instruments CDCLVP111RHBT Clock Buffers & Drivers applications.
- Dual core processor workstations and servers
- Mobile Internet Device (MID)
- Switch
- Tlecom applications
- Data center
- Cell Phone (UMTS/WCDMA/GSM)
- Peak detection
- 5G
- Cloud computing
- High speed industry
