Name: FSL206MRL
Brand: ON Semiconductor
SKU: FSL206MRL
Availability: InStock

new-10%

FSL206MRL

Manufacturer part number:FSL206MRL

Manufacturer:ON Semiconductor

Description:8 Terminations7V~26V 8 Pin FSL206 AC to DC power converterFPS? Series 1 Outputs67kHz

Case Package:SOT-23

Datasheet:FSL206MRL Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	7 Weeks
Lifecycle Status	LAST SHIPMENTS (Last Updated: 1 day ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-SMD, Gull Wing
Number of Pins	8
Weight	710mg
Operating Temperature	-40°C~150°C TJ
Packaging	Tube
Published	2016
Series	FPS™
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	8
ECCN Code	EAR99
Resistance	19Ohm
Terminal Finish	Tin (Sn)
Power (Watts)	12W
Subcategory	Switching Regulator or Controllers
Power Rating	7W
Max Power Dissipation	1.3W
Terminal Position	DUAL
Peak Reflow Temperature (Cel)	250
Number of Functions	1
Terminal Pitch	2.54mm
Base Part Number	FSL206
Number of Outputs	1
Output Voltage	650V
Input Voltage-Nom	10V
Voltage	26V
Analog IC - Other Type	SWITCHING CONTROLLER
Nominal Supply Current	300μA
Current	660mA
Power Dissipation	1.3W
Voltage - Supply (Vcc/Vdd)	7V~26V
Max Supply Current	1.3mA
Turn On Delay Time	6.1 ns
Topology	Flyback
Min Input Voltage	26V
Control Mode	CURRENT-MODE
Frequency - Switching	67kHz
Max Input Voltage	265V
Control Technique	PULSE WIDTH MODULATION
Nominal Input Voltage	26V
Turn-Off Delay Time	43.6 ns
Switcher Configuration	SINGLE
Max Output Power	7W
Internal Switch(s)	Yes
Fault Protection	Current Limiting, Over Load, Over Temperature, Over Voltage
Max Duty Cycle	78 %
Duty Cycle	72%
Output Isolation	Isolated
Voltage - Start Up	8V
Min Input Voltage (AC)	85V
Max Input Voltage (AC)	265V
Min Breakdown Voltage	650V
Height	3.6mm
Length	9.4mm
Width	6.6mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	RoHS Compliant

FSL206MRL Product Details

FSL206MRL Overview

An embedded ac to dc converter is included in 8-SMD, Gull Wing package.In Tube AC/DC power converter, it is available.A AC/DC converter of this type is mounted in the way of Surface Mount .It is recommended that the ac dc converter be operated at a temperature of -40°C~150°C TJ in order to ensure its performance.In this AC DC converter, an analog integrated circuit (IC) of type SWITCHING CONTROLLER is employed.The switching frequency reaches 67kHz .This AC/DC converter is designed for use within the range of 7V~26V supply voltage (Vcc/Vdd).As a result, it has had 8 terminations.On the ac/dc converter, there are 8 pins.Surface Mount are the recommended mounting method for the ac dc converters.This AC to DC converter belongs to the FPS? family of manufacturers.It is possible to search for similar acdc converters by using the FSL206 family.In this AC to DC transformer, there are 1 outputs to run.The ac to dc conversions are contained in Switching Regulator or Controllers .As a result, its output voltage is 650V .It is possible to read the REACH SVHC standard at: No SVHC .Under 265V , it is possible to power the AC to DC converter's input voltage.If the input voltage is less than 26V V, the AC to DC inverter can be used.AC to DC converter can handle a maximum supply current of 1.3mA .The AC to DC power converter's input voltage (AC) should be below 265V .The power AC DC's resistance can be determined to be 19Ohm .AC to DC power converters with a max output power of 7W may be used.