Name: LNK563GN
Brand: Power Integrations
SKU: LNK563GN
Availability: InStock

new-10%

LNK563GN

Manufacturer part number:LNK563GN

Manufacturer:Power Integrations

Description:7 Terminations7 Pin AC to DC power converterLinkSwitch?-LP Series 1 Outputs83kHz Min 85V VMax 265V V

Case Package:SOT-23

Datasheet:LNK563GN Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	4 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-SMD (7 Leads), Gull Wing
Number of Pins	7
Operating Temperature	-40°C~150°C TJ
Packaging	Tube
Published	2008
Series	LinkSwitch®-LP
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	4 (72 Hours)
Number of Terminations	7
ECCN Code	EAR99
Terminal Finish	Matte Tin (Sn)
Power Rating	2.5W
Max Power Dissipation	2.5W
Terminal Position	DUAL
Number of Functions	1
Terminal Pitch	2.54mm
Pin Count	8
Number of Outputs	1
Output Voltage	5.8V
Output Type	Adjustable
Analog IC - Other Type	SWITCHING REGULATOR
Nominal Supply Current	220μA
Output Current	148mA
Output Power	2.5W
Topology	Flyback
Min Input Voltage	85V
Frequency - Switching	83kHz
Max Input Voltage	265V
Control Technique	PULSE WIDTH MODULATION
Switcher Configuration	SINGLE
Internal Switch(s)	Yes
Fault Protection	Current Limiting, Open Loop, Over Temperature, Short Circuit
Max Duty Cycle	70 %
Max Supply Voltage (AC)	265V
Output Isolation	Isolated
Voltage - Breakdown	700V
Min Input Voltage (AC)	85V
Max Input Voltage (AC)	265V
Min Supply Voltage (AC)	85V
Height	3.68mm
Length	9.83mm
Width	6.6mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	RoHS Compliant
Lead Free	Lead Free

LNK563GN Product Details

LNK563GN Overview

The ac to dc converter is embedded in 8-SMD (7 Leads), Gull Wing package.In Tube case, the ac dc converter is available.Surface Mount is mounted in the way of this AC/DC converter.Ideally, the ac dc converter should be operated at a temperature of -40°C~150°C TJ degrees Celsius.In this AC DC converter, an analog integrated circuit (IC) of type SWITCHING REGULATOR is employed.When the switching frequency reaches 83kHz , the circuit is closed.Total terminations are 7 .The ac/dc converter has a total of 7 pins.A total of 8 pins are present on the ac-dc converter.It are possible to mount thare ac dc converters by Surface Mount .A member of the LinkSwitch?-LP manufacturer family, it has the following characteristics.There are 1 outputs to be run.The output current is set to 148mA .In this AC to DC transformer, the output voltage is 5.8V .SVHC for REACH can be found in the standard No SVHC .Input voltages under 265V can be used to power the AC to DC converter.The output power of a coverter is assumed to be 2.5W .It is possible to operate the AC to DC inverter with an input voltage that is less than 85V V.In order for the converter to function properly, the supply voltage must be at least 85V .Across the converter, a maximum supply voltage of 265V may be applied.Ideally, the input voltage (AC) applied to the AC to DC power converter should be less than 265V .It uses Adjustable as an output.