FSA3157BL6X Overview
The electronic part can be shipped overseas conveniently because it is packaged in 6-UFDFN. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. A switch device like this is mounted in Surface Mount. In the multiplexer and demultiplexer, 2:1 represents the number of circuits. Temperatures around -40°C~85°C TA are extended for operation. The total number of terminations is 6. As a result of its 1 channels, this electronic component provides high-quality output. When a voltage supply of 2.3V is used, the electronic component should be turned on and run. Unlike digital switches, these are based on SPDT switching circuits. Look for analog switch ic variants by searching with FSA3157. An switch multiplexer with 10Ohm internal resistance has a value of 10Ohm. To find out what the functions of 6 pins are, please refer to their datasheets. In this analog multiplexer, the value is Multiplexer or Switches. Multiplexers should not be powered above 5.5V in normal situations. A analog switch ic that has a cost-effective Single supply type. There should be 1.65V voltage fed to the electrical part below 1.65V. This analog switch requires a voltage of 1.65V~5.5V to drain from a single voltage supply. The analogue multiplexer may be damaged if voltage is greater than 1μA. The 1 inputs need to be operated in order to work. 2 outputs are included in the analogue multiplexer.
FSA3157BL6X Features
1 Channels
Switch Circuit: SPDT
-3db Bandwidth: 250MHz
FSA3157BL6X Applications
There are a lot of ON Semiconductor FSA3157BL6X Analog Switches & Multiplexers ICs applications.
- ISDN NT1/TA
- Audio signal routing
- Communication systems
- Microwave transmission systems
- Modems
- Microprocessor Controlled Analog Systems
- SDH
- Sample hold systems
- DSUs
- Microprocessor controlled systems
